Skip to content

Tutorial

Jump to bottom Edit New page
Nutti edited this page Feb 11, 2018 · 87 revisions

Older Version

Version Link
5.0 This Page
4.5 Tutorial
4.2 Tutorial
4.1 Tutorial
4.0 Tutorial
3.2 Tutorial

Contents

Copy/Paste UV

Among faces (in 3D View)

Copy and paste UV coordinates among same/different object's faces in 3D View.
Location 3D View > Tool shelf > Copy/Paste UV
Mode Edit

[Usage]

  1. Click check box Copy/Paste UV to show Copy/Paste UV menu
  2. Select faces whose UV you want to copy
  3. Click Copy > (Target UV Map)
  4. Select faces whose UV you want to paste
  5. Click Paste > (Target UV Map)
  • Selection Sequence option provides a way to specify the ordering of copied/pasted faces by face selection
  • If Seams option is enabled, you can also copy/paste seams
  • Strategy option provides a way to decide copy/paste UV repeatedly if a number of copied faces is differs from pasted faces
  • You can flip or rotate UV by changing Flip Copied UV option or Rotate Copied UV option in tool shelf option

Among faces (in UV/Image Editor)

Copy and paste UV coordinates among same/different object's faces in UV/Image Editor.
Location UV/Image Editor > Tool shelf > Copy/Paste UV
Mode Edit

[Usage]

  1. Select UVs you want to copy
  2. Click Copy
  3. Select UVs you want to paste
  4. Click Paste

Among objects

Copy and paste UV coordinates among same topology objects.
Location 3D View > Tool shelf > Copy/Paste UV
Mode Object

[Usage]

  1. Select object whose UV you want to copy
  2. Click Copy > (Target UV Map)
  3. Select objects whose UV you want to paste
  4. Click Paste > (Target UV Map)
  • If Seams option is enabled, you can also copy/paste seams
  • You can paste UV to the multiple objects

Transfer UV

Copy and paste UV coordinates based on the mesh's topology.
Location 3D View > Tool shelf > Copy/Paste UV
Mode Edit

[Usage]

  1. Click check box Transfer UV to show Transfer UV menu
  2. Select 2 adjacent faces of the mesh whose UV you want to copy
  3. Click Copy
  4. Select 2 adjacent faces of the mesh whose UV you want to paste
  5. Click Paste

NOTICE: Copied/Pasted mesh must have the same number of faces

  • Transfer UV ignore the hidden faces.
  • You can paste UV to the multiple meshes
  • If Seams option is enabled, you can also copy/paste seams
  • If Invert Normals option is enabled, you can copy/paste to the mirrored mesh

Flip/Rotate UV

Flip or rotate UV.
Location 3D View > Tool shelf > UV Manipulation
Mode Edit

[Usage]

  1. Click check box Flip/Rotate UV to show Flip/Rotate UV menu
  2. Select faces whose UV you want to flip or rotate.
  3. Click Flip/Rotate UV
  4. Change value Flip UV or Rotate UV in Tool shelf option
  • If Seams option is enabled, you can also flip/rotate seams

Mirror UV

Make mirrored UV. This feature is derived from below add-on.
Addon: Copy UVs from Mirror
Location 3D View > Tool shelf > UV Manipulation
Mode Edit

[Usage]

  1. Click check box Mirror UV to show Mirror UV menu
  2. Select faces you want to refer
  3. Choose the axis of the mirror direction
  4. Click Mirror
  • Error option in tool shelf option can change the error threshold for mirror

Move UV
Location 3D View > Tool shelf > UV Manipulation
Mode Edit

Move UV with a mouse in 3D View. This feature is derived from below add-on.
ADDON: Move the UV from the 3D view

[Usage]

  1. Click check box Move UV to show Move UV menu
  2. Select vertices/edges/faces whose UV you want to move
  3. Click Start
  4. Press Mouse Left Button to start moving UV
  5. You can move UV with mouse
  6. Press Mouse Left Button to stop moving UV
  • If you want to cancel moving UV, press Mouse Right Button

World Scale UV

Measure and set texel density. This feature is derived from below add-on.
[Addon] World Scale UV
Location 3D View > Tool shelf > UV Manipulation
Mode Edit

[Usage]

  1. Click check box World Scale UV to show World Scale UV menu
  2. Select face you want to measure texel density
  3. Click Measure
  4. You can see mesh area, UV area and density
  5. Select face you want to apply texel density.
  6. Click Apply
  • Mode option provides a way to change the calculation method of applying texel density
  • Origin option changes the UV origin after applying texel density

Preserve UV Aspect

Change assigned texture with preserving UV aspect.
Location 3D View > Tool shelf > UV Manipulation
Mode Edit

[Usage]

  1. Click check box Preserve UV Aspect to show Preserve UV Aspect menu
  2. Select face you want to change texture
  3. Select texture you want to assign
  4. Click Change Image
  • Origin option changes the UV origin after changing texture

Texture Lock

Preserve UV while you edit the mesh. This feature is same as "Preserve UVs" feature on 3dsmax.
Location 3D View > Tool shelf > UV Manipulation
Mode Edit

Normal Mode

[Usage]

  1. Click check box Texture Lock to show Texture Lock menu
  2. Select vertices/edges/faces which you want to preserve UV
  3. Click Lock
  4. Transform vertices/edges/faces as you like
  5. Click Unlock, you can return to the UV before locking
  • If connect option is enabled, you can keep UV connection by changing other face's UV.

Interactive mode

[Usage]

  1. Click check box Texture Lock to show Texture Lock menu
  2. Select vertices/edges/faces which you want to preserve UV
  3. Click Start
  4. Preserve UV even if you transform vertices/edges/faces
  5. Click Stop

Texture Wrap

Texture wrap can set texture coordinate along to the mesh structure.
Location 3D View > Tool shelf > UV Manipulation
Mode Edit

[Usage]

  1. Click check box Texture Wrap to show Texture Wrap menu
  2. Select a face whose UV you want to refer as initial position
  3. Click Refer
  4. Select an adjacent face whose UV you want to set
  5. Click Set
  • If Set and Refer option is enabled, you don't need to click Refer after clicking Set as long as you refer same face
  • If Selection Sequence option is enabled, you can select multiple faces and apply Set. The application order follows the selection sequence

UV Sculpt

UV Sculpt in 3D View. Same features are supported as the UV sculpt in UV/Image Editor.
Location 3D View > Tool shelf > UV Manipulation
Mode Edit

[Usage]

  1. Click check box UV Sculpt to show UV Sculpt menu
  2. Select faces whose UV you want to sculpt
  3. Click Start
  4. Sculpt UV as you like (See detail each tool's usage)
  5. Click Stop
Grab Move UV along to the mouse movement while you press Mouse Left Button
Relax Relax UV while you press Mouse Left Button
Pinch Pinch UV while you press Mouse Left Button
  • If Show Brush option is enabled, display the brush's effective range while sculpting
  • Radius option provides the way to change the brush radius
  • Strength option provides the way to change the effectiveness
  • You can change tool from Tools option
  • Method option (only available on Relax tool) provides the way to change the relax method
  • If Invert option (only available on Pinch tool) is enabled, the direction of pinch will be inverted

Unwrap Constraint

Unwrap UV with an axis fixed. This feature is same as "Unfold Constraints" feature on Maya.
Location 3D View > Tool shelf > UV Mapping
Mode Edit

[Usage]

  1. Click check box Unwrap Constraint to show Unwrap Constraint menu
  2. Select faces whose UV you want to unwrap
  3. Enable or disable U-Constraint option and V-constraint option to fix axis while unwrapping
  4. Click Unwrap
  • Default unwrap option is available from tool shelf option

Texture Projection

Project the texture to the mesh while displaying texture image in 3D View.
Location 3D View > Tool shelf > UV Mapping
Mode Edit

[Usage]

  1. Click check box Texture Projection to show Texture Projection menu
  2. Select faces whose UV you want to apply Texture Projection
  3. Select the texture to be projected
  4. Click Start to display the texture
  5. Adjust texture size and the mesh location to decide the location of projection
  6. Click Project to project texture to UV
  7. Click Stop
  • Transparency option provides the way to change transparency of the displayed texture
  • If Adjust Window is enabled, size of the displayed texture is adjusted to the window
  • Magnitude option (only available if Adjust Window is disabled) provides the way to change size of displayed texture
  • If Texture Aspect Ratio is enabled, keep the original aspect of the displayed texture
  • If Assign UV Map is enabled, assign new UV map when no UV is assigned to the mesh

UVW

UVW mapping.
Location 3D View > Tool shelf > UV Mapping
Mode Edit

[Usage]

  1. Click check box UVW to show UVW menu
  2. Select face you want to apply UVW mapping
  3. Click Box if you apply Box mapping, or click Best Planner if you apply Best Planner mapping
  • If Assign UV Map is enabled, assign new UV map when no UV is assigned to the mesh
  • From tool shelf option, you can tweak mapping configuration

Manipulate UV with Bounding Box in UV Editor

Location: Image Editor in Edit Mode

UV editing with Bounding Box in Image/UV Editor which likes Photoshop/GIMP's Bounding Box transformation.

  1. Enable Enable feature: UV Bouding Box from add-on preference
  2. Press Display UV Bounding Box on property window in UV/Image Editor
  3. Manipulate UV by Bounding Box (Manipulation follows the Photoshop/Gimp Bounding Box rules)
  4. Press Hide UV Bounding Box to stop manipulation

Pack UV (with same UV island packing)

Location: Image Editor in Edit Mode

Integrate same island's shape when Island Packing is done.

  1. Select faces whose UVs will be packed
  2. Press UVs > Pack UV in UV/Image Editor to start packing
Add a custom footer
Add a custom sidebar
Clone this wiki locally