How do I add a custom calibration test?

[osnapitsjoey]

I use a fan speed calibration test from printables that requires that I change settings in the filament cooling section. I'm getting tired of inputting and changing these parameters every time as I run this with every new filament I get. How can I make it so I can grab this from the calibration drop down, and have it change only the cooling settings I need, and not also change filaments or temperatures etc?

[RedPigTech]

I was coming here to ask the same thing. I use several different calibration tools depending on my project.
Is there a way to add them to the calibration menu? If not it would be great to be able to add ones own calibration tools to Orca so we don't have to go looking for them.

[osnapitsjoey]

What calibrations do you use if you don't mind me asking? Id like to find a working one for support set up and the like

…

On Thu, Apr 3, 2025, 8:13 PM RedPigTech ***@***.***> wrote: I was coming here to ask the same thing. I use several different calibration tools depending on my project. Is there a way to add them to the calibration menu? If not it would be great to be able to add ones own calibration tools to Orca so we don't have to go looking for them. — Reply to this email directly, view it on GitHub <#8607 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA2JRJUODNVTJFUXJSSF6JT2XXMFBAVCNFSM6AAAAABYA6JSNCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENZRHE3TGNY> . You are receiving this because you authored the thread.Message ID: ***@***.***>

[RedPigTech]

For supports I used to use my own ones and have tried so many in the past. I have been using uncle Jessy’s lately and have had good results. https://makerworld.com/en/models/700778-support-removal-test-no-more-stuck-supports?from=search#profileId-631830 I also have 2 or 3 different ones that I have made for testing how flat and level my bed is. And one for testing ABS shrinkage. Some creators suggest using specific calibration tools for their builds. I tend to use the same ones they use so I can get the same result. I tend to lose those so it would be nice to have them in Orca in case I want to use them again. From: Albert Smith ***@***.***> Sent: Friday, 4 April 2025 1:35 pm To: SoftFever/OrcaSlicer ***@***.***> Cc: RedPigTech ***@***.***>; Comment ***@***.***> Subject: Re: [SoftFever/OrcaSlicer] How do I add a custom calibration test? (Discussion #8607) What calibrations do you use if you don't mind me asking? I’d like to find a working one for support set up and the like

On Thu, Apr 3, 2025, 8:13 PM RedPigTech ***@***.*** <mailto:***@***.***> > wrote: I was coming here to ask the same thing. I use several different calibration tools depending on my project. Is there a way to add them to the calibration menu? If not it would be great to be able to add ones own calibration tools to Orca so we don't have to go looking for them. — Reply to this email directly, view it on GitHub <#8607 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA2JRJUODNVTJFUXJSSF6JT2XXMFBAVCNFSM6AAAAABYA6JSNCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENZRHE3TGNY> . You are receiving this because you authored the thread.Message ID: ***@***.*** <mailto:***@***.***> >

— Reply to this email directly, view it on GitHub <#8607 (comment)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/BN52JVY3NLTAP2CQQIQJOYD2XXHSBAVCNFSM6AAAAABYA6JSNCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENZRHE4DGNA> . You are receiving this because you commented. <https://github.com/notifications/beacon/BN52JVZGDCGLUKGCL6JCYWT2XXHSBA5CNFSM6AAAAABYA6JSNCWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAYILNU.gif> Message ID: ***@***.*** ***@***.***> >

[ianalexis]

I have already made calibration tests similar to this one.
I will try to do it, but I will use some of my own geometry to avoid claims.
With a tower from 0 to 100 with bridges in multiplies of 5 would be ok?
How many layers should the bridge have? 1, 2, 3? more I don't think it would be necessary.

[osnapitsjoey]

I think multiples of 5 is probably best. And yeah I was never really sure why it had such large bridges. Maybe to account for the 45 degree overhangs or something?

…

On Tue, Apr 8, 2025, 2:57 PM Ian Bassi ***@***.***> wrote: I have already made calibration tests similar to this one. I will try to do it, but I will use some of my own geometry to avoid claims. With a tower from 0 to 100 with bridges in multiplies of 5 would be ok? How many layers should the bridge have? 1, 2, 3? more I don't think it would be necessary. — Reply to this email directly, view it on GitHub <#8607 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA2JRJS4EBSTTKI64CBLP6D2YQL3FAVCNFSM6AAAAABYA6JSNCVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTENZWHEYDKNQ> . You are receiving this because you authored the thread.Message ID: ***@***.***>