How to get this hardware form JLCPCB

[AcSully]

How can I get this board step by step? I don’t know much about hardware, thanks a lot

[DanielMartensson]

How can I get this board step by step? I don’t know much about hardware, thanks a lot

Hi @AcSully
Use the gerber.zip and upload it.
If you solder it by hand, look at the boom list. It's very easy!

[AcSully]

How can I get this board step by step? I don’t know much about hardware, thanks a lot

Hi @AcSully Use the gerber.zip and upload it. If you solder it by hand, look at the boom list. It's very easy!

ok, understand, I want to mount them directly on the PCB in JLCPCB

[AcSully]

How can I get this board step by step? I don’t know much about hardware, thanks a lot

Hi @AcSully Use the gerber.zip and upload it. If you solder it by hand, look at the boom list. It's very easy!

Hello, I want to install them directly on the PCB of JLCPCB(china version).

1. I need a BOM. Where are the files?
2. https://www.jlc.com/newOrder/#/pcb/newOnlinePlaceOrder(update gerber.zip to this web)
   
3. The customer service review result is: "The file you provided is gerber.zip missing the outline layer (that is, the board border is missing)"

[DanielMartensson]

@AcSully
You need need an Altium 365 account. Then you can access my files.

But the USB hub has wrong footprint. I can help you with this later. Right now i have no access to my computer. But first het an Altium account and install CircuitMaker.

I write later. Am at a party right now. Cannot write clearly.

[AcSully]

@AcSully You need need an Altium 365 account. Then you can access my files.

But the USB hub has wrong footprint. I can help you with this later. Right now i have no access to my computer. But first het an Altium account and install CircuitMaker.

I write later. Am at a party right now. Cannot write clearly.

Have fun guys. I have already registered this account(Altium 365).
I really like this project. So I want to make the same board.

[DanielMartensson]

@AcSully You need need an Altium 365 account. Then you can access my files.
But the USB hub has wrong footprint. I can help you with this later. Right now i have no access to my computer. But first het an Altium account and install CircuitMaker.
I write later. Am at a party right now. Cannot write clearly.

Have fun guys. I have already registered this account(Altium 365). I really like this project. So I want to make the same board.

@AcSully

First you need to download the project from CircuitMaker repository.
But be ware! The footprint of the USB hub is wrong! You need to replace it with the correct footprint.

If you want, I can give you acceess to change the footprint. All I need is your account email of Altium 365.

Everything else is working fine.

[AcSully]

@AcSully You need need an Altium 365 account. Then you can access my files.
But the USB hub has wrong footprint. I can help you with this later. Right now i have no access to my computer. But first het an Altium account and install CircuitMaker.
I write later. Am at a party right now. Cannot write clearly.

Have fun guys. I have already registered this account(Altium 365). I really like this project. So I want to make the same board.

@AcSully

First you need to download the project from CircuitMaker repository. But be ware! The footprint of the USB hub is wrong! You need to replace it with the correct footprint.

If you want, I can give you acceess to change the footprint. All I need is your account email of Altium 365.

Everything else is working fine.

My email of Altium 365(sully.niu@outlook.com), I don't know how to change the footprint. Can you help me to change this?

[DanielMartensson]

@AcSully

It's very easy to change the footprint. All you need to do is to replace the schematic symbol of the USB hub. Then the footrpint will update automaticly. But you need to change the tracks as well. Few mm only.

[DanielMartensson]

@AcSully i have shared to sully.niu@outlook.com) now.

[AcSully]

@AcSully i have shared to sully.niu@outlook.com) now.

I downloaded CircuitMaker and opened the project. What to do next?

I need to change the footprint, right?

[DanielMartensson]

@AcSully

Yes. You need to find another schematic symbol for USB1514B. It's very easy. Then the footprint will be updated. But you need to route some new tracks as well on the PCB.

Have you writing access? Or only reading access?

[AcSully]

@AcSully

Yes. You need to find another schematic symbol for USB1514B. It's very easy. Then the footprint will be updated. But you need to route some new tracks as well on the PCB.

Have you writing access? Or only reading access?

Only reading access. The hardware is too difficult for me, I should not be able to proceed further.

[DanielMartensson]

@AcSully
Yes. You need to find another schematic symbol for USB1514B. It's very easy. Then the footprint will be updated. But you need to route some new tracks as well on the PCB.
Have you writing access? Or only reading access?

Only reading access. The hardware is too difficult for me, I should not be able to proceed further.

@AcSully

It's super easy to change the symbol. Just delete it and ad a new symbol with correct footprint .

The problem is that the current footprint of USB2514B is a rectangle. It should be a square.

[AcSully]

ok, for hardware beginners, i will do my best and let you know result.

[DanielMartensson]

@AcSully

There is a free made ready to use library already. It the the same schematic symbol. Only the footprint is correct.