Merge pull request #1 from sparkfun/ambiq_apollo3_gpio_irq

Ambiq apollo3 gpio irq

Author: Wenn0101

.mbedignore

@@ -1 +0,0 @@
-features/

targets/TARGET_Ambiq_Micro/TARGET_Apollo3/TARGET_AMA3B1KK/TARGET_SparkFun_Artemis_Module/TARGET_SparkFun_RedBoard_Artemis_ATP/PinNames.h

@@ -25,41 +25,46 @@ SOFTWARE.
 #include "device.h"
 
 #ifdef __cplusplus
-extern "C" {
+extern "C"
+{
 #endif
 
-#define NC_VAL (int)0xFFFFFFFF
-
-typedef enum {
-    // Digital naming
-    D16 = 16,
-    D31 = 31,
-    D45 = 45,
-    D44 = 44,
-
-    // Analog naming
-    A16 = D16,
-    A31 = D31,
-
-    // LEDs
-    LED_BLUE    = AM_BSP_GPIO_LED_BLUE,
-
-    // mbed original LED naming
-    LED1 = AM_BSP_GPIO_LED0,
-    
-    // Qwiic
-    QWIIC_SCL = 39,
-    QWIIC_SDA = 40,
-    
-    // UART
-    SERIAL_TX = 48,
-    SERIAL_RX = 49,
-    USBTX = SERIAL_TX,
-    USBRX = SERIAL_RX,
-        
-    // Not connected
-    NC = NC_VAL
-} PinName;
+#define NC_VAL (uint32_t)0xFFFFFFFF
+
+    typedef enum
+    {
+        // Digital naming
+        D16 = 16,
+        D31 = 31,
+        D45 = 45,
+        D44 = 44,
+
+        // Analog naming
+        A16 = D16,
+        A31 = D31,
+
+        // LEDs
+        LED_BLUE = AM_BSP_GPIO_LED_BLUE,
+
+        // mbed original LED naming
+        LED1 = AM_BSP_GPIO_LED0,
+
+        // Qwiic
+        QWIIC_SCL = 39,
+        QWIIC_SDA = 40,
+
+        // UART
+        SERIAL_TX = 48,
+        SERIAL_RX = 49,
+        USBTX = SERIAL_TX,
+        USBRX = SERIAL_RX,
+
+        // Not connected
+        NC = NC_VAL
+    } PinName;
+
+#define STDIO_UART_TX USBTX
+#define STDIO_UART_RX USBRX
 
 #ifdef __cplusplus
 }

targets/TARGET_Ambiq_Micro/TARGET_Apollo3/TARGET_AMA3B1KK/device/PeripheralNames.h

@@ -0,0 +1,145 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "PeripheralPins.h"
+
+/************RTC***************/
+const PinMap PinMap_RTC[] = {
+		{NC, 0, 0},
+};
+
+/************ADC***************/
+const PinMap PinMap_ADC[] = {
+		{NC, NC, 0}};
+
+/************DAC***************/
+const PinMap PinMap_DAC[] = {
+		{NC, NC, 0}};
+
+/************I2C***************/
+const PinMap PinMap_I2C_SDA[] = {
+		{NC, NC, 0}};
+
+const PinMap PinMap_I2C_SCL[] = {
+		{NC, NC, 0}};
+
+/************UART***************/
+const PinMap PinMap_UART_TX[] = {
+		{1, UART_0, AM_HAL_PIN_1_UART0TX},
+		{7, UART_0, AM_HAL_PIN_7_UART0TX},
+		{16, UART_0, AM_HAL_PIN_16_UART0TX},
+		{20, UART_0, AM_HAL_PIN_20_UART0TX},
+		{22, UART_0, AM_HAL_PIN_22_UART0TX},
+		{26, UART_0, AM_HAL_PIN_26_UART0TX},
+		{28, UART_0, AM_HAL_PIN_28_UART0TX},
+		{30, UART_0, AM_HAL_PIN_30_UART0TX},
+		{39, UART_0, AM_HAL_PIN_39_UART0TX},
+		{41, UART_0, AM_HAL_PIN_41_UART0TX},
+		{48, UART_0, AM_HAL_PIN_48_UART0TX},
+		{8, UART_1, AM_HAL_PIN_8_UART1TX},
+		{12, UART_1, AM_HAL_PIN_12_UART1TX},
+		{14, UART_1, AM_HAL_PIN_14_UART1TX},
+		{18, UART_1, AM_HAL_PIN_18_UART1TX},
+		{20, UART_1, AM_HAL_PIN_20_UART1TX},
+		{24, UART_1, AM_HAL_PIN_24_UART1TX},
+		{35, UART_1, AM_HAL_PIN_35_UART1TX},
+		{37, UART_1, AM_HAL_PIN_37_UART1TX},
+		{39, UART_1, AM_HAL_PIN_39_UART1TX},
+		{42, UART_1, AM_HAL_PIN_42_UART1TX},
+		{46, UART_1, AM_HAL_PIN_46_UART1TX},
+		{NC, NC, 0}};
+
+const PinMap PinMap_UART_RX[] = {
+		{2, UART_0, AM_HAL_PIN_2_UART0RX},
+		{4, UART_0, AM_HAL_PIN_4_UART0RX},
+		{11, UART_0, AM_HAL_PIN_11_UART0RX},
+		{17, UART_0, AM_HAL_PIN_17_UART0RX},
+		{21, UART_0, AM_HAL_PIN_21_UART0RX},
+		{23, UART_0, AM_HAL_PIN_23_UART0RX},
+		{27, UART_0, AM_HAL_PIN_27_UART0RX},
+		{29, UART_0, AM_HAL_PIN_29_UART0RX},
+		{31, UART_0, AM_HAL_PIN_31_UART0RX},
+		{34, UART_0, AM_HAL_PIN_34_UART0RX},
+		{40, UART_0, AM_HAL_PIN_40_UART0RX},
+		{45, UART_0, AM_HAL_PIN_45_UART0RX},
+		{49, UART_0, AM_HAL_PIN_49_UART0RX},
+		{9, UART_1, AM_HAL_PIN_9_UART1RX},
+		{13, UART_1, AM_HAL_PIN_13_UART1RX},
+		{15, UART_1, AM_HAL_PIN_15_UART1RX},
+		{19, UART_1, AM_HAL_PIN_19_UART1RX},
+		{21, UART_1, AM_HAL_PIN_21_UART1RX},
+		{25, UART_1, AM_HAL_PIN_25_UART1RX},
+		{36, UART_1, AM_HAL_PIN_36_UART1RX},
+		{38, UART_1, AM_HAL_PIN_38_UART1RX},
+		{40, UART_1, AM_HAL_PIN_40_UART1RX},
+		{43, UART_1, AM_HAL_PIN_43_UART1RX},
+		{47, UART_1, AM_HAL_PIN_47_UART1RX},
+		{NC, NC, 0}};
+
+const PinMap PinMap_UART_RTS[] = {
+		{3, UART_0, AM_HAL_PIN_3_UART0RTS},
+		{5, UART_0, AM_HAL_PIN_5_UART0RTS},
+		{13, UART_0, AM_HAL_PIN_13_UART0RTS},
+		{18, UART_0, AM_HAL_PIN_18_UART0RTS},
+		{34, UART_0, AM_HAL_PIN_34_UART0RTS},
+		{35, UART_0, AM_HAL_PIN_35_UART0RTS},
+		{37, UART_0, AM_HAL_PIN_37_UART0RTS},
+		{41, UART_0, AM_HAL_PIN_41_UART0RTS},
+		{10, UART_1, AM_HAL_PIN_10_UART1RTS},
+		{16, UART_1, AM_HAL_PIN_16_UART1RTS},
+		{20, UART_1, AM_HAL_PIN_20_UART1RTS},
+		{30, UART_1, AM_HAL_PIN_30_UART1RTS},
+		{31, UART_1, AM_HAL_PIN_31_UART1RTS},
+		{34, UART_1, AM_HAL_PIN_34_UART1RTS},
+		{41, UART_1, AM_HAL_PIN_41_UART1RTS},
+		{44, UART_1, AM_HAL_PIN_44_UART1RTS},
+		{NC, NC, 0}};
+
+const PinMap PinMap_UART_CTS[] = {
+		{4, UART_0, AM_HAL_PIN_4_UART0CTS},
+		{6, UART_0, AM_HAL_PIN_6_UART0CTS},
+		{12, UART_0, AM_HAL_PIN_12_UART0CTS},
+		{24, UART_0, AM_HAL_PIN_24_UART0CTS},
+		{29, UART_0, AM_HAL_PIN_29_UART0CTS},
+		{33, UART_0, AM_HAL_PIN_33_UART0CTS},
+		{26, UART_0, AM_HAL_PIN_36_UART0CTS},
+		{38, UART_0, AM_HAL_PIN_38_UART0CTS},
+		{11, UART_1, AM_HAL_PIN_11_UART1CTS},
+		{17, UART_1, AM_HAL_PIN_17_UART1CTS},
+		{21, UART_1, AM_HAL_PIN_21_UART1CTS},
+		{26, UART_1, AM_HAL_PIN_26_UART1CTS},
+		{29, UART_1, AM_HAL_PIN_29_UART1CTS},
+		{32, UART_1, AM_HAL_PIN_32_UART1CTS},
+		{36, UART_1, AM_HAL_PIN_36_UART1CTS},
+		{45, UART_1, AM_HAL_PIN_45_UART1CTS},
+		{NC, NC, 0}};
+
+/************SPI***************/
+const PinMap PinMap_SPI_SCLK[] = {
+		{NC, NC, 0}};
+
+const PinMap PinMap_SPI_MOSI[] = {
+		{NC, NC, 0}};
+
+const PinMap PinMap_SPI_MISO[] = {
+		{NC, NC, 0}};
+
+const PinMap PinMap_SPI_SSEL[] = {
+		{NC, NC, 0}};
+
+/************PWM***************/
+const PinMap PinMap_PWM[] = {
+		{NC, NC, 0}};