Merge branch 'master' into feat/zigbee-gateway

SuGlider · web-flow · commit 43aef6c1b1f9 · 2025-02-25T16:48:30.000-03:00
diff --git a/cores/esp32/HardwareSerial.cpp b/cores/esp32/HardwareSerial.cpp
@@ -11,18 +11,6 @@
 #include "driver/uart.h"
 #include "freertos/queue.h"
 
-#ifndef ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE
-#define ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE 2048
-#endif
-
-#ifndef ARDUINO_SERIAL_EVENT_TASK_PRIORITY
-#define ARDUINO_SERIAL_EVENT_TASK_PRIORITY (configMAX_PRIORITIES - 1)
-#endif
-
-#ifndef ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE
-#define ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE -1
-#endif
-
 #if (SOC_UART_LP_NUM >= 1)
 #define UART_HW_FIFO_LEN(uart_num) ((uart_num < SOC_UART_HP_NUM) ? SOC_UART_FIFO_LEN : SOC_LP_UART_FIFO_LEN)
 #else
diff --git a/cores/esp32/HardwareSerial.h b/cores/esp32/HardwareSerial.h
@@ -97,15 +97,27 @@ typedef enum {
 } hardwareSerial_error_t;
 
 #ifndef ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE
+#ifndef CONFIG_ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE
 #define ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE 2048
+#else
+#define ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE CONFIG_ARDUINO_SERIAL_EVENT_TASK_STACK_SIZE
+#endif
 #endif
 
 #ifndef ARDUINO_SERIAL_EVENT_TASK_PRIORITY
+#ifndef CONFIG_ARDUINO_SERIAL_EVENT_TASK_PRIORITY
 #define ARDUINO_SERIAL_EVENT_TASK_PRIORITY (configMAX_PRIORITIES - 1)
+#else
+#define ARDUINO_SERIAL_EVENT_TASK_PRIORITY CONFIG_ARDUINO_SERIAL_EVENT_TASK_PRIORITY
+#endif
 #endif
 
 #ifndef ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE
+#ifndef CONFIG_ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE
 #define ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE -1
+#else
+#define ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE CONFIG_ARDUINO_SERIAL_EVENT_TASK_RUNNING_CORE
+#endif
 #endif
 
 // UART0 pins are defined by default by the bootloader.
diff --git a/libraries/Zigbee/examples/Zigbee_Analog_Input_Output/ci.json b/libraries/Zigbee/examples/Zigbee_Analog_Input_Output/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_CarbonDioxide_Sensor/ci.json b/libraries/Zigbee/examples/Zigbee_CarbonDioxide_Sensor/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Color_Dimmable_Light/ci.json b/libraries/Zigbee/examples/Zigbee_Color_Dimmable_Light/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Color_Dimmer_Switch/ci.json b/libraries/Zigbee/examples/Zigbee_Color_Dimmer_Switch/ci.json
@@ -1,6 +1,6 @@
 {
   "fqbn_append": "PartitionScheme=zigbee_zczr,ZigbeeMode=zczr",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Contact_Switch/ci.json b/libraries/Zigbee/examples/Zigbee_Contact_Switch/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Dimmable_Light/ci.json b/libraries/Zigbee/examples/Zigbee_Dimmable_Light/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_OTA_Client/ci.json b/libraries/Zigbee/examples/Zigbee_OTA_Client/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Occupancy_Sensor/ci.json b/libraries/Zigbee/examples/Zigbee_Occupancy_Sensor/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_On_Off_Light/ci.json b/libraries/Zigbee/examples/Zigbee_On_Off_Light/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_On_Off_Switch/ci.json b/libraries/Zigbee/examples/Zigbee_On_Off_Switch/ci.json
@@ -1,6 +1,6 @@
 {
   "fqbn_append": "PartitionScheme=zigbee_zczr,ZigbeeMode=zczr",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Pressure_Flow_Sensor/ci.json b/libraries/Zigbee/examples/Zigbee_Pressure_Flow_Sensor/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Range_Extender/Zigbee_Range_Extender.ino b/libraries/Zigbee/examples/Zigbee_Range_Extender/Zigbee_Range_Extender.ino
@@ -34,7 +34,12 @@
 /* Zigbee light bulb configuration */
 #define USE_CUSTOM_ZIGBEE_CONFIG 1
 #define ZIGBEE_EXTENDER_ENDPOINT 1
-uint8_t led = RGB_BUILTIN;
+
+#ifndef LED_BUILTIN
+#define LED_BUILTIN 4
+#endif
+
+uint8_t led = LED_BUILTIN;
 uint8_t button = BOOT_PIN;
 
 ZigbeeRangeExtender zbExtender = ZigbeeRangeExtender(ZIGBEE_EXTENDER_ENDPOINT);
diff --git a/libraries/Zigbee/examples/Zigbee_Range_Extender/ci.json b/libraries/Zigbee/examples/Zigbee_Range_Extender/ci.json
@@ -1,6 +1,6 @@
 {
   "fqbn_append": "PartitionScheme=zigbee_zczr,ZigbeeMode=zczr",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Scan_Networks/ci.json b/libraries/Zigbee/examples/Zigbee_Scan_Networks/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Temp_Hum_Sensor_Sleepy/ci.json b/libraries/Zigbee/examples/Zigbee_Temp_Hum_Sensor_Sleepy/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Temperature_Sensor/ci.json b/libraries/Zigbee/examples/Zigbee_Temperature_Sensor/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Thermostat/ci.json b/libraries/Zigbee/examples/Zigbee_Thermostat/ci.json
@@ -1,6 +1,6 @@
 {
   "fqbn_append": "PartitionScheme=zigbee_zczr,ZigbeeMode=zczr",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Vibration_Sensor/ci.json b/libraries/Zigbee/examples/Zigbee_Vibration_Sensor/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }
diff --git a/libraries/Zigbee/examples/Zigbee_Window_Covering/ci.json b/libraries/Zigbee/examples/Zigbee_Window_Covering/ci.json
@@ -1,6 +1,7 @@
 {
   "fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",
   "requires": [
-    "CONFIG_SOC_IEEE802154_SUPPORTED=y"
+    "CONFIG_SOC_IEEE802154_SUPPORTED=y",
+    "CONFIG_ZB_ENABLED=y"
   ]
 }

Original file line number	Diff line number	Diff line change
`@@ -1,6 +1,7 @@`
`1`	`1`	`{`
`2`	`2`	`"fqbn_append": "PartitionScheme=zigbee,ZigbeeMode=ed",`
`3`	`3`	`"requires": [`
`4`		`- "CONFIG_SOC_IEEE802154_SUPPORTED=y"`
	`4`	`+ "CONFIG_SOC_IEEE802154_SUPPORTED=y",`
	`5`	`+ "CONFIG_ZB_ENABLED=y"`
`5`	`6`	`]`
`6`	`7`	`}`
Original file line number	Diff line number	Diff line change
`@@ -1,6 +1,6 @@`
`1`	`1`	`{`
`2`	`2`	`"fqbn_append": "PartitionScheme=zigbee_zczr,ZigbeeMode=zczr",`
`3`	`3`	`"requires": [`
`4`		`- "CONFIG_SOC_IEEE802154_SUPPORTED=y"`
	`4`	`+ "CONFIG_ZB_ENABLED=y"`
`5`	`5`	`]`
`6`	`6`	`}`