targets:RT1050: Fix the flash erase and program issue for qspi nor flash.

Update the LUT to fix the winbond qspi flash erase issue.
Update the page program interface to fix the qspi flash program issue.

Signed-off-by: Tim Wang <[email protected]>

Author: Tim-Wang38

targets/TARGET_NXP/TARGET_MCUXpresso_MCUS/TARGET_IMX/flash_api.c

@@ -293,7 +293,7 @@ status_t flexspi_nor_flash_page_program_ram(uint32_t address, const uint32_t *sr
         flashXfer.cmdType       = kFLEXSPI_Write;
         flashXfer.SeqNumber     = 2;
         flashXfer.seqIndex      = HYPERFLASH_CMD_LUT_SEQ_IDX_PAGEPROGRAM;
-        flashXfer.data          = (uint32_t *)(src + offset);
+        flashXfer.data          = (uint32_t *)((uint32_t)src + offset);
         flashXfer.dataSize      = BOARD_FLASH_PAGE_SIZE;
 
         status = FLEXSPI_TransferBlocking(FLEXSPI, &flashXfer);
@@ -509,7 +509,7 @@ status_t flexspi_nor_flash_page_program_ram(uint32_t address, const uint32_t *sr
         flashXfer.cmdType       = kFLEXSPI_Write;
         flashXfer.SeqNumber     = 1;
         flashXfer.seqIndex      = NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_QUAD;
-        flashXfer.data          = (uint32_t *)(src + offset);
+        flashXfer.data          = (uint32_t *)((uint32_t)src + offset);
         flashXfer.dataSize      = BOARD_FLASH_PAGE_SIZE;
 
         status = FLEXSPI_TransferBlocking(FLEXSPI, &flashXfer);

targets/TARGET_NXP/TARGET_MCUXpresso_MCUS/TARGET_MIMXRT1050/TARGET_EVK/flash_defines.h

@@ -227,7 +227,7 @@ static uint32_t customLUT[CUSTOM_LUT_LENGTH] = {
 
     /* Erase Sector  */
     [4 * NOR_CMD_LUT_SEQ_IDX_ERASESECTOR] =
-    FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0xD7, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x18),
+    FLEXSPI_LUT_SEQ(kFLEXSPI_Command_SDR, kFLEXSPI_1PAD, 0x20, kFLEXSPI_Command_RADDR_SDR, kFLEXSPI_1PAD, 0x18),
 
     /* Page Program - single mode */
     [4 * NOR_CMD_LUT_SEQ_IDX_PAGEPROGRAM_SINGLE] =