Merge pull request #12097 from shuopeng-deng/pr/fix-iar-warnings

cypress target: fix iar warnings

Author: adbridge

targets/TARGET_Cypress/TARGET_PSOC6/cy_port_api.c

@@ -41,7 +41,7 @@ void port_init(port_t *obj, PortName port, int mask, PinDirection dir)
 
 void port_mode(port_t *obj, PinMode mode)
 {
-    gpio_t gpio = {.pin = 0, .direction = obj->direction, .drive_mode = obj->drive_mode};
+    gpio_t gpio = {.direction = obj->direction, .drive_mode = obj->drive_mode};
     for (uint8_t pin = 0; pin < 8; pin++) {
         if ((1 << pin) & obj->mask) {
             gpio.pin = port_pin(obj->port, pin);
@@ -52,7 +52,7 @@ void port_mode(port_t *obj, PinMode mode)
 
 void port_dir(port_t *obj, PinDirection dir)
 {
-    gpio_t gpio = {.pin = 0, .direction = obj->direction, .drive_mode = obj->drive_mode};
+    gpio_t gpio = {.direction = obj->direction, .drive_mode = obj->drive_mode};
     for (uint8_t pin = 0; pin < 8; pin++) {
         if ((1 << pin) & obj->mask) {
             gpio.pin = port_pin(obj->port, pin);

targets/TARGET_Cypress/TARGET_PSOC6/cy_serial_api.c

@@ -125,7 +125,6 @@ void serial_format(serial_t *obj, int data_bits, SerialParity parity, int stop_b
             break;
         default:
             MBED_ERROR(MBED_MAKE_ERROR(MBED_MODULE_DRIVER_SERIAL, MBED_ERROR_CODE_UNSUPPORTED), "Unsupported parity");
-            return;
     }
     cyhal_uart_cfg_t cfg = {
         .data_bits = data_bits,
@@ -152,11 +151,11 @@ void serial_irq_set(serial_t *obj, SerialIrq irq, uint32_t enable)
         static const cyhal_uart_event_t interrupt_mask = (cyhal_uart_event_t)
                                                          (CYHAL_UART_IRQ_RX_DONE | CYHAL_UART_IRQ_RX_ERROR | CYHAL_UART_IRQ_RX_NOT_EMPTY);
         ser->rx_event_mask = enable
-                             ? (ser->rx_event_mask | interrupt_mask)
-                             : (ser->rx_event_mask & ~interrupt_mask);
+                             ? (cyhal_uart_event_t)(ser->rx_event_mask | interrupt_mask)
+                             : (cyhal_uart_event_t)(ser->rx_event_mask & ~interrupt_mask);
         cyhal_uart_enable_event(&(ser->hal_obj), interrupt_mask, CYHAL_ISR_PRIORITY_DEFAULT, (bool)enable);
     } else if (irq == TxIrq) {
-        static const cyhal_uart_event_t interrupt_mask = CYHAL_UART_IRQ_TX_DONE | CYHAL_UART_IRQ_TX_ERROR | CYHAL_UART_IRQ_TX_EMPTY;
+        static const cyhal_uart_event_t interrupt_mask = (cyhal_uart_event_t)(CYHAL_UART_IRQ_TX_DONE | CYHAL_UART_IRQ_TX_ERROR | CYHAL_UART_IRQ_TX_EMPTY);
         ser->tx_event_mask = enable
                              ? (cyhal_uart_event_t)(ser->tx_event_mask | interrupt_mask)
                              : (cyhal_uart_event_t)(ser->tx_event_mask & ~interrupt_mask);

targets/TARGET_Cypress/TARGET_PSOC6/cy_spi_api.c

@@ -45,7 +45,6 @@ SPIName spi_get_peripheral_name(PinName mosi, PinName miso, PinName mclk)
         return (SPIName)CYHAL_SCB_BASE_ADDRESSES[map->inst->block_num];
     }
     MBED_ERROR(MBED_MAKE_ERROR(MBED_MODULE_DRIVER_SPI, MBED_ERROR_CODE_FAILED_OPERATION), "SPI not found");
-    return (SPIName)0;
 }
 
 static void cy_spi_irq_handler_internal(void *handler_arg, cyhal_spi_event_t event)