M2354: Comply with standard pin naming rule

Author: ccli8

targets/TARGET_NUVOTON/TARGET_M2354/TARGET_NU_M2354/PinNames.h

@@ -33,53 +33,46 @@ typedef enum {
     NC = (int)0xFFFFFFFF,
 
     // Generic naming
-    PA_0    = NU_PORT_N_PIN_TO_PINNAME(0, 0), PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PA_8, PA_9, PA_10, PA_11, PA_12, PA_13, PA_14, PA_15,
-    PB_0    = NU_PORT_N_PIN_TO_PINNAME(1, 0), PB_1, PB_2, PB_3, PB_4, PB_5, PB_6, PB_7, PB_8, PB_9, PB_10, PB_11, PB_12, PB_13, PB_14, PB_15,
-    PC_0    = NU_PORT_N_PIN_TO_PINNAME(2, 0), PC_1, PC_2, PC_3, PC_4, PC_5, PC_6, PC_7, PC_8, PC_9, PC_10, PC_11, PC_12, PC_13,
-    PD_0    = NU_PORT_N_PIN_TO_PINNAME(3, 0), PD_1, PD_2, PD_3, PD_4, PD_5, PD_6, PD_7, PD_8, PD_9, PD_10, PD_11, PD_12, PD_14 = PD_12 + 2,
-    PE_0    = NU_PORT_N_PIN_TO_PINNAME(4, 0), PE_1, PE_2, PE_3, PE_4, PE_5, PE_6, PE_7, PE_8, PE_9, PE_10, PE_11, PE_12, PE_13, PE_14, PE_15,
-    PF_0    = NU_PORT_N_PIN_TO_PINNAME(5, 0), PF_1, PF_2, PF_3, PF_4, PF_5, PF_6, PF_7, PF_8, PF_9, PF_10, PF_11,
-    PG_2    = NU_PORT_N_PIN_TO_PINNAME(6, 2), PG_3, PG_4, PG_9 = PG_4 + 5, PG_10, PG_11, PG_12, PG_13, PG_14, PG_15,
-    PH_4    = NU_PORT_N_PIN_TO_PINNAME(7, 4), PH_5, PH_6, PH_7, PH_8, PH_9, PH_10, PH_11,
+    PA_INIT = NU_PORT_N_PIN_TO_PINNAME(0, 0), PA_0 = PA_INIT, PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PA_8, PA_9, PA_10, PA_11, PA_12, PA_13, PA_14, PA_15,
+    PB_INIT = NU_PORT_N_PIN_TO_PINNAME(1, 0), PB_0 = PB_INIT, PB_1, PB_2, PB_3, PB_4, PB_5, PB_6, PB_7, PB_8, PB_9, PB_10, PB_11, PB_12, PB_13, PB_14, PB_15,
+    PC_INIT = NU_PORT_N_PIN_TO_PINNAME(2, 0), PC_0 = PC_INIT, PC_1, PC_2, PC_3, PC_4, PC_5, PC_6, PC_7, PC_8, PC_9, PC_10, PC_11, PC_12, PC_13,
+    PD_INIT = NU_PORT_N_PIN_TO_PINNAME(3, 0), PD_0 = PD_INIT, PD_1, PD_2, PD_3, PD_4, PD_5, PD_6, PD_7, PD_8, PD_9, PD_10, PD_11, PD_12, PD_14 = PD_12 + 2,
+    PE_INIT = NU_PORT_N_PIN_TO_PINNAME(4, 0), PE_0 = PE_INIT, PE_1, PE_2, PE_3, PE_4, PE_5, PE_6, PE_7, PE_8, PE_9, PE_10, PE_11, PE_12, PE_13, PE_14, PE_15,
+    PF_INIT = NU_PORT_N_PIN_TO_PINNAME(5, 0), PF_0 = PF_INIT, PF_1, PF_2, PF_3, PF_4, PF_5, PF_6, PF_7, PF_8, PF_9, PF_10, PF_11,
+    PG_INIT = NU_PORT_N_PIN_TO_PINNAME(6, 0), PG_2 = PG_INIT + 2, PG_3, PG_4, PG_9 = PG_4 + 5, PG_10, PG_11, PG_12, PG_13, PG_14, PG_15,
+    PH_INIT = NU_PORT_N_PIN_TO_PINNAME(7, 0), PH_4 = PH_INIT + 4, PH_5, PH_6, PH_7, PH_8, PH_9, PH_10, PH_11,
 
     // Arduino UNO naming
-    A0 = PB_11,
-    A1 = PB_10,
-    A2 = PB_9,
-    A3 = PB_8,
-    A4 = PB_7,
-    A5 = PB_6,
-
-    D0 = PA_8,
-    D1 = PA_9,
-    D2 = PC_1,
-    D3 = PC_0,
-    D4 = PE_7,
-    D5 = PE_6,
-    D6 = PC_12,
-    D7 = PC_11,
-    D8 = PC_9,
-    D9 = PC_10,
-    D10 = PA_3,
-    D11 = PA_0,
-    D12 = PA_1,
-    D13 = PA_2,
-    D14 = PG_3,
-    D15 = PG_2,
+    ARDUINO_UNO_A0 = PB_11,
+    ARDUINO_UNO_A1 = PB_10,
+    ARDUINO_UNO_A2 = PB_9,
+    ARDUINO_UNO_A3 = PB_8,
+    ARDUINO_UNO_A4 = PB_7,
+    ARDUINO_UNO_A5 = PB_6,
+
+    ARDUINO_UNO_D0 = PA_8,
+    ARDUINO_UNO_D1 = PA_9,
+    ARDUINO_UNO_D2 = PC_1,
+    ARDUINO_UNO_D3 = PC_0,
+    ARDUINO_UNO_D4 = PE_7,
+    ARDUINO_UNO_D5 = PE_6,
+    ARDUINO_UNO_D6 = PC_12,
+    ARDUINO_UNO_D7 = PC_11,
+    ARDUINO_UNO_D8 = PC_9,
+    ARDUINO_UNO_D9 = PC_10,
+    ARDUINO_UNO_D10 = PA_3,
+    ARDUINO_UNO_D11 = PA_0,
+    ARDUINO_UNO_D12 = PA_1,
+    ARDUINO_UNO_D13 = PA_2,
+    ARDUINO_UNO_D14 = PG_3,
+    ARDUINO_UNO_D15 = PG_2,
 
     // Other board-specific naming
 
     // UART naming
-#if defined(MBED_CONF_TARGET_USB_UART_TX)
-    CONSOLE_TX      = MBED_CONF_TARGET_USB_UART_TX,
-#else
-    CONSOLE_TX      = NC,
-#endif
-#if defined(MBED_CONF_TARGET_USB_UART_RX)
-    CONSOLE_RX      = MBED_CONF_TARGET_USB_UART_RX,
-#else
-    CONSOLE_RX      = NC,
-#endif
+    CONSOLE_TX           = MBED_CONF_TARGET_USB_UART_TX,
+    CONSOLE_RX           = MBED_CONF_TARGET_USB_UART_RX,
+
 #if defined(MBED_CONF_TARGET_STDIO_UART_TX)
     STDIO_UART_TX   = MBED_CONF_TARGET_STDIO_UART_TX,
 #else
@@ -91,23 +84,18 @@ typedef enum {
     STDIO_UART_RX   = CONSOLE_RX,
 #endif
 
-    // I2C naming
-    I2C_SCL = D15,
-    I2C_SDA = D14,
-
-    // LED naming
-    LED1 = PD_2,
-    LED2 = PD_3,
-
-    // Button naming
-    SW2 = PF_11,
-    BUTTON1 = SW2,
-
     // Force PinName to 32-bit required by NU_PINNAME_BIND(...)
     FORCE_ENUM_PINNAME_32BIT = 0x7FFFFFFF,
 
 } PinName;
 
+// LED naming
+#define LED1        PD_2
+#define LED2        PD_3
+
+// Button naming
+#define BUTTON1     PF_11 // SW2
+
 #ifdef __cplusplus
 }
 #endif

targets/targets.json

@@ -6944,6 +6944,9 @@
         "inherits": [
             "MCU_M2354"
         ],
+        "supported_form_factors": [
+            "ARDUINO_UNO"
+        ],
         "detect_code": [
             "1312"
         ],